The oil light blinked and bell rang oil changed stopped running?

I had the oil pump%26amp;screen cleaned and it stopped and won';t start up it turns but won';t crankThe oil light blinked and bell rang oil changed stopped running?
The oil light came on because the oil pressure became too low. This light usually comes on when the oil pressure is below 5 pounds of pressure.





Without oil pressure, it can take only a second to do serious damage to your engine. Spun main or rod bearing.





If it starts, listen closely for any knocking noises coming from the engine. The noise will be obvious.





It is possible that your engine management computer shut down the ignition system when it sensed the low oil pressure.





This usually needs to be reset through the computer diagnostic port using a special scan tool.





Some models of engine management computers will lose this fault code stopping the engine when the power is disconnected. Try disconnecting the negative lead to the battery. Leave it disconnected for at least 15 minutes. Reconnect and try to start.

acne prone skin