Your NOT using 10W30 for your premix oil are you?? 10W30 is for the crankcase transmission only. You HAVE to use a two stroke blend oil for the premix. Or the motor will seize.
You can premix the gas and oil ( 2 stroke blend not 10W30) together and add it to the fuel tank if you'd like. It won't hurt anything by doing that. All motocross bikes ( 2 strokes) are mixed together and added to the tank.
If this bike is new I doubt if it is the sending unit. If it has a lot of miles on it then yes it could be the sending unit or a short in the wiring.My oil light wont stop blinking?
Either your sensor is malfunctioning or you need an oil change or to add oil. First check your oil. Do you have enough? Is the the color clear or is it rusty brown? If it is rusty brown then you need to change your oil asap! If Everything checks out then it's probably your sensor on the fritz. You need to take it in to professional to have it fixed.
First you were born and things never got better you Hilljack piece ofshit.
The sending unit which causes the light to activate is probably the culprit. Have it checked or replace it. It's not all that expensive and replaciing it will eliminate one more possiblity.
i dont know but if i was you witch im not i dont think,i would take the car to a shop but cents i am me i would take the car and shove it up someones a**
have you tried filling the two stroke oil tank?
No comments:
Post a Comment